Owner`s manual

Raider Classic 250 (double-seat): Owner’s Manual EEC Version:2.0 Feb. 2007

[E] RUNNING-IN OF NEW ENGINE

The running-in distance is 1000km. During this period, please follow the instructions below:

(1) Run the engine according to the requirements specified; Do not overwork the engine. Avoid keeping the

throttle full open.

(2) Rotate the throttle slowly after starting the engine; don’t speed up or speed down suddenly;

(3) Drive on smooth roads; don’t drive uphill or on rough roads for a long time;

(4) Keep the oil lines smooth;

(5) Avoid speeding up suddenly or running the engine at a high speed without loading;

(6) Maintain your vehicle according to the service intervals, and if necessary, repair it as soon as possible;

(7) After the running-in period, clean the crankcase and replace the oil; remove the carbon on the top of the

piston and in the combustion chamber; adjust the spark plug electrode gap and valve clearance; check if

the oil lines are smooth; maintain your whole vehicle according to the requirements specified in this

Owner’s Manual.

(8) Change engine oil and clean air filter screen every 500 miles of use.