Owner`s manual

Raider Classic 250 (double-seat): Owner’s Manual EEC Version:2.0 Feb. 2007

[B] STARTING THE ENGINE

Step on the brake pedal fully, insert ignition key and

turn the ignition switch clockwise. Once the engine is ignited,

step on the throttle pedal slightly to warm up the engine for a

few minutes.

NOTE :

1) Immediately after starting the engine, release ignition switch to prevent damaging the starter motor.

2) Do not turn on ignition switch while the engine is already running to prevent damaging the starter

motor.

3) Do not repeatedly turn on ignition switch if the engine fails to have quick start. Wait for 10 seconds

before second try. On the second try, turn ignition switch with the throttle pedal slightly depressed.

4) In cold weather, warm up the engine for several minutes at idle speed before driving the buggy. Then

speed up after the operation temperature is reached.

5) In hot weather, avoid excessive running of engine at idle speed otherwise engine will get overheated.

6) Do not leave your buggy alone after the engine is started.

Brake