Operating instructions

3
E
N
G
L
I
S
H
Model 1VNW9A
Dayton Operating Instructions
Maintenance
1. Always turn OFF the heater and
disconnect the cord from the
electrical outlet before cleaning
your heater.
2. Light accumulated dust may be
removed from the heater with a
soft cloth or vacuum cleaner.
3. Wipe the exterior surfaces of the
heater occasionally with a damp cloth
(not dripping wet), using a solution
of mild detergent and water. Dry the
case thoroughly before operating the
heater.
Do not allow
water to run into
the interior of the heater as this could
create a fire or electric shock hazard.
4. To clean the dust filter positioned on
the back of the heater:
a. Remove it
b. Wash dust filter with clear water.
c. When dry, attach to back of
heater.
5. The fan motor is factory lubricated
for life and will require no further
lubrication.
6. Store heater in a clean dry place
when not in use.
CAUTION
Any other
servicing needed
must be performed by an authorized
service representative. Do not attempt
to service the unit yourself.
WARNING