User Guide

- Select the HDD Model and press “Stop” button as following image.
- Remove Daytek FHD-254U2 from the PC when you see the following message.
6. Daytek FHD-254U2 Installation (Windows ME/2000/XP)
- Windows ME, Windows 2000 and Windows XP detect and install the Driver automatically (Plug & Play)
when Daytek FHD-254U2 is connected to USB port.
- If the device is installed correctly, the following icon appears in the task bar.
- Now you are ready to use the new External Portable Hard Disk Drive (HDD).
- If you want to physically disconnect Daytek FHD-254U2 from the PC after using, click on the icon in the
task bar and select “Safely Remove Hardware”.
- Select “Stop” button when you see the following image. When the window pops up and ask you for
confirmation, click “OK”.