Owner's manual

Tools Needed

Part List

Bill of Materials

Part No. Description Qty

M20151 Front Spacer 2

S20150 Stud extenders 6

S10010 10mm Washer 6

S10292 10mm –1.5 lock nut 6

P11153 Thread lock / Decal 1

Description Qty

Pry Bar 1

Floor Jack 1

Jack Stands / Wheel chocks 2

Lug Wrench 1

10mm wrench 1

17mm wrench 1

20mm wrench 1

21mm wrench 1

Torque wrench 1

IMPORTANT NOTICE : The advertised amount of lift that this kit

provides and the thickness of the spacers supplied will not be the same!

For example, a 2-1/2” lift may only have 1-1/2” thick spacers. The

reason for the difference between the spacer thickness and the amount

of lift has to do with suspension geometry. There is a ratio involved,

and it is this ratio that determines the thickness of the spacers. Rest

assured, installing the spacer supplied will result in the proper amount

Installation Instructions

!Warning: Always work with appropriate personal safety

gear including safety glasses, gloves and hearing protection if

using air powered tools.

Begin by inspecting the components & hardware for dam-

age. Then compare components & hardware to the bill of materi-

als for completeness. If anything is missing/damaged, do not pro-

ceed with the installation. Please, call Daystar Products (800-595-

7659) and we will send you the missing of damaged components

free of charge.

!Caution: Vehicle front end must be raised to install leveling

kit. Using a hydraulic chassis lift will greatly ease installation.

If another jack is used, assure vehicle is level on a firm sur-

face, in

park (1st

gear), rear

wheels

blocked and jack stands in place to support vehicle in case

jack or vehicle shifts.