User guide

Chapter 3 – Connecting Additional Peripherals GenesisMP34 ◆
First let’s connect audio equipment (like a boom box) to your Genesis MP
1. Find the stereo miniplug connector or RCA-type connectors on your audio equip-
ment. If there are none, attach the appropriate adapter.
2. Make sure the you have turned off both your Genesis MP and the audio equipment.
3. Place the equipment close to your Genesis MP.
4. Attach the cable to the audio equipment and the correct port on Genesis MP.
Remember: For incoming sound, attach the audio equipment to the sound or audio
input ports. For outgoing sound, the sound or audio output ports must be used.
Adding a Boom Box for
Incoming Sound
Connecting a Microphone
With software that supports sound input such as the Sound control panel, you can use
the Apple PlainTalk Microphone or a compatible line-level microphone to record your
voice or other sounds to use on your Genesis MP.
1. Shut off your Genesis MP
2. Plug the connector of the microphone into the sound input port on the back of
your Genesis MP.
3. Place the microphone at a distance of one to three feet away from you.
4. Then center the microphone so that it is directly in front of you.
5. Turn on your Genesis MP and—
You’re ready to record.
Note: You cannot use the round lower-quality Apple microphone with your
Genesis MP.
Microphone port
Stereo out port