Instruction manual

To remove the AV module:
1. Remove the two Torx™ attaching screws with a Torx T-8 driver.
Removing the Audio/Video (AV) module
2. If you have not already done so, remove the nPOWER proces-
sor card to provide clearance. See section nPOWER Card.
3. Disconnect the AV cable from its slot near the nPOWER proces-
sor card slot.
Removing the Audio/Video (AV) cable
Replacement is the reverse of removal. Use care not to place
undue strain on the delicate AV cable during replacement.
Genesis MP Chapter 4 – Removal and Replacement
◆ 63