Instruction manual

To remove the top cap bezel:
1. Remove the CD-ROM drive to provide clearance. See section
CD-ROM Drive.
2. Unscrew the two captive Phillips head screws using a 14˝ #2
Phillips-head screwdriver.
Screwdrivers engaging
top cap attaching screws
Top cap attaching screws
3. Remove the top cap bezel.
Reinstallation is the reverse of removal.
Audio/Video (AV) Module (3-slot units only)
The Audio/Video (AV) Module is mounted to the metal AV Panel,
which is in turn mounted to the rear panel of the Genesis MP. You
will typically remove the AV Module when removing the mother-
board from the 3-slot Genesis MP.
CAUTION
The AV module and AV cable are delicate. Removal is recom-
mended whenever the motherboard is removed in order to provide
protection for the module and the cable.
Chapter 4 – Removal and Replacement Genesis MP62 ◆
∆
!