Instruction manual

Power Switch and Cable Assembly
There are two versions of Genesis MP with respect to the power
switch: Motherboard Power Switch machines, and Power Supply
Power Switch machines.
One power switch and cable assembly is used for both machines.
The replacement procedures differ significantly, however.
Determine which version of Genesis MP you are servicing before
you begin, and read and understand the replacement procedure
for that version before continuing.
Power switch in front panel.
(seen from above)
Motherboard Power Switch units:
The Power Switch is located at the top of the front panel and con-
nects to the motherboard at the lower right hand corner.
Motherboard
power switch connection
Removal and replacement of the Power Switch and Cable assem-
bly requires removal of the Genesis MP front panel and the moth-
erboard. Read and understand those procedures before beginning.
To remove and replace the Power Switch:
1. Remove the Genesis MP Motherboard. See section Genesis
MP Motherboard.
2. Remove any 3.5˝ drives installed in the 3.5˝ drive bay.
Chapter 4 – Removal and Replacement Genesis MP54 ◆