Instruction manual

bly. Take care to note where each screw comes from. Refer to the
diagrams Motherboard Screws and Standoffs for proper place-
ment of screws upon reassembly.
Failure to follow these instructions will result in damage to the
nylon standoffs which help hold the motherboard in place.
Replacement of the standoffs can be time-consuming.
Proceed with care!
9. Remove the screws holding the motherboard in place. Consult
the diagrams below for the locations of the screws. TAKE CARE
to note the location of each screw so that the unit may be
reassembled with each screw in the proper place. Support the
motherboard while removing the last few screws so that it does
not fall out.
Chapter 4 – Removal and Replacement Genesis MP40 ◆