User guide

Mac OS Custom Install window
6. Select the System Software components you wish to install.
You may get information about each component by clicking on
the i to the right of each component. If you wish to select only
individual items of a component, click on the arrow to the left of
the component.
7. Be sure that the drive you wish to install the System Software
on is selected as the Destination Disk. If it’s not, click Switch
Disk until the correct drive appears.
8. Click on the Install button.
9. Once the installation is completed, you will need to install your
Genesis MP software located on the DayStar Genesis MP CD-
ROM if you have not already done so.
Chapter 5 – Installing Genesis MP System Software 86 ◆