User guide

17.Click on the Install or Clean Install button in the main window.
18.Once the installation is completed, you can install any addition-
al Apple System Software from the CD-ROM that you choose
to have installed. If you are new to the Mac OS, we suggest
that you install the Macintosh Tutorial software.
19.Once you have installed the Apple software, you will need to
install your Genesis MP software located on your Genesis MP
CD-ROM. We also recommend that you do not reinstall system
extensions and applications that may have been deleted, or
moved to the Previous System Folder, until after installing your
Genesis MP software.
Performing a Custom Install
If you wish to install or update only specific portions of the Mac
OS, you can perform a Custom Install by following these steps.
Note: If you are installing System Software onto a new hard
drive, make sure that the drive has been formatted. You may
use FWB’s Hard Disk Toolkit, included with your Genesis MP
Conversion, to format the drive, or use the software that came
with the drive. If your boot drive needs to be reformatted,
boot from your Genesis MP Boot Disk to get your machine up
and then format the drive with the formatting software.
1. Turn off Genesis MP.
2. Insert your Genesis MP Boot Disk into the floppy drive and turn
on your Genesis MP.
3. Insert the Apple System Software CD-ROM into the CD-ROM player.
4. Open Install System Software and click Continue.
5. Select Custom Install from the pop-up menu in the upper left
corner of the window.
To perform a clean install, hold
down the Command-Shift-K keys
at the same time. When the win-
dow shown here appears, select
Install New System Folder and
click OK.
Genesis MP Chapter 5 – Installing Genesis MP System Software
◆ 85