User guide

9. Open HDT Primer and select your hard drive from the list of
connected devices by clicking on it.
10.From the Driver menu select Update Driver…
Note: If your hard disk was formatted with a utility other than
FWB’s Hard Disk Toolkit, you can update your drivers using
the latest version of that application or use Hard Disk Toolkit.
If you do not know which software was used to format your
disk, contact the vendor who sold it to you.
Note: If your drive needs to be formatted, click on the format
button. Performing a format on your drive will cause all data
on that drive to be destroyed.
11. Once completed, quit HDT Primer and remove your Genesis
CD-ROM from your CD-ROM player.
12.Restart your Genesis MP from the Genesis MP Boot Disk.
13. Insert the Apple System Software CD-ROM into the CD-ROM player.
14.Open the Install System Software folder and then open the
Install System Software application. Click Continue. The Easy
Install window shown below appears.
Mac OS Easy Install window
15.Be sure that the drive you wish to install the System Software
on is selected as the Destination Disk. If it’s not, click Switch
Disk until the correct drive appears.
16.If you are installing the System Software on a drive that already
has System Software on it, you may wish to perform a clean
installation. A clean install creates a brand new System Folder
and moves the contents of your old System Folder to a new
folder named Previous System Folder. A clean install is recom-
mended if your old System Folder has become corrupt or files
that have been added to your System Folder are causing com-
patibility problems.
Chapter 5 – Installing Genesis MP System Software 84 ◆