User guide

Adjust the fit of the floppy drive by pushing the rear of the drive
toward the front of the Genesis MP Conversion. You should be
able to feel when the adjustment is right. The floppy drive should
touch the front vent assembly, yet not push it forward off the front
of the machine.
Adjust floppy drive fit
Tighten the floppy drive securing screws to retain the adjustment.
Tighten floppy drive screws
Working from the rear of the drive, install the floppy drive cable.
Attach floppy drive cable
Chapter 4 – Assembling the Genesis MP Conversion 76 ◆