User guide
Adjust the fit of the CD-ROM drive by pushing the rear of the CD-
ROM drive toward the front of the Genesis MP Conversion. Test
the fit by pressing the CD-ROM eject button on the front of the
bezel. You should be able to feel the button on the CD-ROM drive
working.
Adjust CD-ROM drive fit
Tighten the CD-ROM drive securing screws to retain the adjustment.
Tighten CD-ROM screws
Working from the rear of the drive, attach the CD-ROM audio cable.
Make adjustments to cable routing at this time.
Attach CD-ROM audio cable
Chapter 4 – Assembling the Genesis MP Conversion
72 ◆