User guide

and route it beneath the SCSI cable.
Route floppy drive cable
Finally, attach the motherboard 3.3v power cable.
Attach 3.3v power cable
The AV Panel (3-slot Genesis MP only)
The AV panel allows you to connect the Genesis MP to audio and
video devices. It mounts on the rear panel of the Genesis MP.
Affix the AV panel label to the appropriate metal AV panel supplied
with the Genesis MP Conversion. The label is right-side-up when
the small screw hole at the bottom of the panel is not obscured by
the label.
Affix AV panel label
Chapter 4 – Assembling the Genesis MP Conversion 60 ◆
3