User guide

About Motherboard Screws...
There are two sizes of motherboard screws. It is important that
you use the large screws for the large standoffs, and the small
screws for the small standoffs. Failure do do so will damage the
standoffs.
Consult the photo and diagram “Motherboard Screws and
Standoffs” for detailed information on your motherboard tray
before installing the motherboard.
Two sizes of motherboard screws
About the Motherboard Tray Adjustment...
The Genesis MP motherboard is installed on an adjustable tray.
You will need to adjust the fit of the motherboard and tray in the
Genesis MP Case.
You are about to temporarily attach the motherboard to the tray for
the purpose of making the motherboard tray adjustment. You will
be removing the motherboard again in a few moments after
adjustment.
Insert the motherboard into the Genesis MP Conversion case.
Insert motherboard
Genesis MP Chapter 4 – Assembling the Genesis MP Conversion
◆ 51