User guide

Genesis MP Chapter 3 – Disassembling the Power Macintosh 7500 or 7600
◆ 41
Remove the upper EMI shielding from the floppy disk drive and
upper 3.5" drive bay by lifting as shown in the photo. None of the
EMI shielding will be reused in the Genesis MP.
Remove upper EMI shield
Remove the floppy disk drive by removing the cable, spreading the
retaining arms and pushing the drive toward the back of the
7500/7600 case. Keep the floppy drive - it will be reused in the
Genesis MP.
Remove the floppy drive
Remove the hard drive by lifting the tab at the front of the disk and
pulling it forward.
Remove the hard drive