User guide

Chapter 3 – Disassembling the Power Macintosh 7500 or 7600 Genesis MP40 ◆
Removing the Audio/Video (AV) Module
Using a Torx™ T-8 driver, remove the two screws holding the AV
module in place. Remove the AV module from the inside of the
7500/7600 case.
Remove the AV Module
Save the AV module and screws - they will be reused in the Genesis MP.
Removing Storage Devices
Remove the lower EMI shielding from the CD-ROM and lower 3.5"
drive bays by pressing the tabs as shown.
WARNING
The shielding may be sharp - remove it carefully.
Remove lower EMI shield
∆
!