User guide

Genesis MP Chapter 3 – Disassembling the Power Macintosh 7500 or 7600
◆ 39
The best way to remove the LED connector is to rock the connec-
tor from side to side to loosen its locking mechanism. If needed,
use careful leverage from a small flathead screwdriver to lift the
locking mechanism.
CAUTION
It is possible to break the connector by applying more than a gen-
tle lift to the positive locking mechanism. Use care.
Gentle leverage applied to
locking mechanism
To keep the motherboard safe from damage due to ESD, place it
in the provided anti-static bag until it’s needed.
Place in anti-static bag
IMPORTANT:
If your motherboard is to be upgraded by DayStar, consult the liter-
ature included with your Genesis MP Conversion for important
information about preparing your motherboard for shipment.
∆
!
∆
!