User guide

Remove the CD-ROM drive carrier tray by removing the four screws
and lifting the tray off. The carrier tray is not reused in the Genesis MP
Conversion.
Remove the CD-ROM tray
Removing Audio/Video (AV) Module (8500 only)
Using a Torx™ T-8 driver, remove the two screws holding the AV
module in place. Remove the AV module from the inside of the
8500 case.
Remove the AV module
Save the AV module and screws - they will be reused in the Genesis MP.
Genesis MP Chapter 2 – Disassembling the Power Macintosh 8500 or 9500
◆ 29