User guide

Genesis MP Chapter 2 – Disassembling the Power Macintosh 8500 or 9500
◆ 25
Removing Storage Peripherals
You will be removing and reusing the CD-ROM drive, floppy disk
drive, hard disk drive(s) and any installed internal SCSI peripherals
in the Genesis MP Conversion. The drive carrier trays will not be
reused and must be removed.
Remove the SCSI cable from the CD-ROM drive...
Remove CD-ROM SCSI cable
...then remove the power cable.
Remove CD-ROM power cable
Remove the CD-ROM drive by lifting the latching tab at the front of
the drive and pulling the drive forward until it is released from the
chassis. Set the drive aside - it will be reused in the Genesis MP
Conversion.
Remove the CD-ROM drive