Owner's manual

x r al

Fr o n t Pa n e l

Ba r g r a p h M e t e r s

INPUT LEVELS - Six 10-segment multi-colored LED meters display the audio level for each channel of

the inbound audio stream.

OUTPUT LEVELS - Six 10-segment multi-colored LED meters display the audio level for each channel

of the up-mixed audio stream.

St a t u s In d ica t o r s

Alarm - Red!Led!indicator!illuminates!when!Mono2Stereo!has!an!active!alarm!

condition!or!discovered!a!fault.!!An!error!message!will!be!displayed!on!the!VFD!display.

AES Lock - Green!LED!indicator!illuminates!when!Mono2Stereo!has!acquired!a!valid!

AES3!digital!input!signal.

7.1 MODE - Blue LED indicator illuminates when UpMix is operating in 7.1

channel output mode.

GPIO - Green!LED!indicator!illuminates!when!Mono2Stereo!is!using!any!of!t h e!g e ne ra l!

purpose!input!/!outputs.

Disp la y a n d Co n t r o ls

VACUUM FLUORESCENT DISPLAY - A multi-function display that indicates current operating status

of the unit and programming menus.

ROTARY ENCODER - A stepping optical rotary encoder is used to select values while in the menu

system. To enter the menu, simply rotate the rotary encoder in any direction while UpMix is on the

HOME screen.

ENTER KEY - Used to enter a menu or confirm a selection. This key will also clear an error message

display from the home screen.

HOME KEY - A press of this button will return UpMix to its home screen, or enter home screen

selection mode.

BACK KEY – A press of this key will return to a previous menu, or if you are entering a value, exit the

field and return the value to the last programmed state.