User guide

15"
M4.2Si User Manual
Network
A Read-Only menu that displays the current status of DHCP, the static IP address, Subnet and MAC
address. Navigate up to the top right corner of the menu and Press ENTER next to EXIT to return to
the SYSTEM menu. More NETWORK details can be viewed
Figure 11.
DHCP is set to ‘ON’ by default. Disabling DHCP allows the users to manually enter an IP address,
subnet and gateway IP. Exiting this menu will save and reset the M4.2Si. The new manual IP address
will be displayed on the LCD homescreen
About
A Read-Only menu displaying the HDRadio version, DSP version and Firmware version.
The selection mode arrow is defaulted to the top right corner of the menu. To Exit press ENTER. More
ABOUT details can be viewed in the Settings tab of the WebServer.
Figure 12.