Owner's manual

M2DTV Quick Start Guide

Home Screen

Rear Panel Features

AES INPUTS: Four 75 Ω BNC connectors will accept an AES3 digital audio

stream.

AES OUTPUTS: Two 75 Ω BNC connectors output a pass-through AES

digital audio stream. (Surround Lt Rt– AES 1/2, Stereo Lo Ro - AES 7/8)

AES SYNC/EAS-CAP: Two 75 Ω BNC connectors allowing iLC2ST to sync

from an external source and accept EAS

HD/SDI (Optional): One input and one passive bypass will allow M2DTV to

measure loudness on 8 channels from group one or group two of an HDSDI

signal.

GPIO: A Female DB-9 connection that allows M2DTV to be monitored and

controlled externally.

Network: Connects M2DTV to an Ethernet network to enable firmware

updates or logging

1. Field #1 – 5.1 Surround Measurement

2. Field #1 - Selection and Indicator

3. Field #2 – Loudness Target Level

4. Field #2 – Selection and Unit Indicator

5. Field #3 – 2.0 Stereo Measurement

6. Field #3 – Selection and Indicator

7. Channel Configuration Icon

8. Edit Preset Icon