Manual

HN"
LBR4%Us er%Manual%
"
9F*::$%"9':8,I34*;,':"
"
"
Figure 6. Channel Configuration Menu Display
CH-x Bit-Rate – 24 kbps, 32 kbps, 36, kbps, 48 kbps, 64 kbps and 96 kbps are selectable from this
menu
CH-x Processing – LBR4 is defaulted to process audio. Putting the LBR4 into Bypass mode will
bypass the LBR4’s algorithm and copy the input signal to the output.
CH-x Preset – each channel may select from any the following presets: Classical, Jazz, Pop-Rock,
Light, Heavy, Talk, and User - 1 thru User - 4 (Customizable by the user and can be renamed).
CH-x Meters – Additional meters available for display on each channel include:
1. Input Level – displayed in dBfs
2. Output Level - displayed in dBfs
3. AGC Gain - displayed in dB
4. Compression - displayed in dB
5. Final Limiting - displayed in dB
Ch-x Daypart GPI – Enables or Disables the Daypart GPI. Enabled allows the GPI to switch the
Daypart for each of the four channels.
CH-x Daypart AM – Defines which preset to be used for Daypart AM. Any of the available presets may
be used.
CH-x Daypart PM – Defines which preset to be used for Daypart PM. Any of the available presets may
be used.
CH-x Channel Name – Select this option to custom name each of the four channels