User guide

12"
DownMix(User(Manual(
Meter"Display"
Figure 1. Metering display DownMix.
INPUT LEVELS – LED display shows current amplitude of input signal from
-60dB to 0dB across all active channels. Unused channels will not light the display.
L - Left (AES Input 1) LFE- Low Frequency (AES Input 4)
R - Right (AES Input 2) Ls - Left Surround (AES Input 5)
C - Center (AES Input 3) Rs – Right Surround (AES Input 6)
OUTPUT LEVELS – LED display shows current amplitude of signal generated by DownMix across all
active channels. Unused channels will not light the display.
L - Left (AES Output 1) LFE- Low Frequency (AES Output 4)
R - Right (AES Output 2) Ls - Left Surround (AES Output 5)
C - Center (AES Output 3) Rs – Right Surround (AES Output 6)
Items in italics are used when DownMix is configured to take a 7.1 audio stream and create a 5.1
audio stream (not supported in this code release).
"