Specifications

Issued: 28.02.2005

Strider MD 4 Plus

Fire and burns hazard if battery terminal is

short-circuited!

• Never touch both battery terminals simultaneously with

tools (shorting out).

• Terminals are protected with insulating caps. Only ever

remove the insulating cap from the terminal which you

are going to loosen.

Tools required:

2 x ring spanner; size 10 mm

Remove the batteries from the Strider as

described in chapter 13.3.4.

➨

First (1) loosen the terminal on the

battery negative terminal (black cable)

with a ring spanner size 10 mm, and

remove the cable.

Then (2) loosen the terminal on the

battery positive terminal (red cable) with

a ring spanner size 10 mm, and remove

the cable.

➨

Refitting the battery cable:

Repairs - batteries

17.6.2 Refitting battery cables

Reinserting the batteries into the Strider

as described in chapter 13.4.3.

➨

Replacing the battery and connect the

battery cable in reverse order:

First connect the cable to the battery

positive terminal (2).

Then connect the cable to the battery

negative terminal (1).

➨