Specifications

77
Issued: 28.02.2005
Strider MD 4 Plus Repairs - mechanics
turn the locknut (2) until this contacts the
adjusting screw (3).
Turn the adjusting screw until it contacts
the handle.
➨
➨
at the handlebars.
If this is not the case, then:
Secure the Strider against rolling away.
Raise the side with the braked wheel and
support (see Chapter 18.0).
➨
➨
Before adjusting the brake, check that the
handle adjustment (1) is screwed fully in.
Loosen the adjustment element locknut
(4) on the front wheel.
Turn the adjusting screw (5) until
resistence can be felt at the brake lever
after about 1/3 of its operating distance
(a). (Apply brake lever lightly only).
➨
➨
Hold the adjusting screw (5) immobile
and tighten the locknut (4).
➨
Adjustments at the front
wheel
Brake lever movement
17.3.4 Adjusting the handbrake
Repeat the brake adjustment as
described above on the second brake.
➨