Specifications

Issued: 28.02.2005

Strider MD 4 Plus

1.Remove the seat unit.

2.Remove the rear panelling.

3.Remove the batteries.

4.Fold the tiller down.

5.Disengage the drive unit from the chassis.

In just a few steps you can dismantle the

Strider down to the following components to

make it ready for transport:

1. Chassis

2. Batteries

3. Drive unit

4. Rear panelling

5. Seat unit

13.3.1 Working step summary

13.3.2 Removing the seat

Clamping and crushing hazard!

Increased hazards due to clamping or crushing result due to the

high component weight (such as batteries) during preparation for

transport.

• Always carry out any work to be done with great care.

• Always try to get help from a second person, especially when

stowing parts for transport.

13.3 Preparation for transport - separating component

Tilt the backrest forwards.

First pull out the locking device (1) and

then fold the backrest forward (2).

➨

Tilt the backrest

forwards