Specifications

24
Issued: 28.02.2005
Strider MD 4 Plus
Accident hazard due to non-engaged seat!
• Ensure that the seat is properly engaged after adjustment
by pushing the seat slightly forwards and then backwards.
Moving the seat
Pull the locking lever (1) upwards and
move the seat forwards or backwards to
the required distance.
Let go of locking lever and engage the
locking mechanism by pushing the seat
slightly forwards and backwards.
➨
➨
Tilt the backrest
backwards
Tilt the backrest backwards:
Pull the locking lever (1) and move the
backrest backwards to the required
position (2).
Let go of the locking lever and engage
the locking mechanism by pushing the
backrest slightly forwards and
backwards.
➨
➨
Adjusting the seat position
Loosen both clamping screws (2).
Pull both armrests (3) simultaneously to
the required width.
Secure the armrests by tightening the
clamping screws.
➨
➨
➨
CAUTION!
• Do not pull the armrests further
out than the marking (a) for
maximum armrest width.
Adjusting armrest width
5.2.1 Adjusting the distance between seat and
tiller
5.2.2 Adjusting the armrest width
5.2 Adjusting the seat position