User Manual

21
battery
The Phoenix comes with two fully removable batteries. Only the battery on the down
tube is operational, the second battery must be switched onto the down tube to get the
full range of the two batteries.
To remove a battery. First put a key in and turn it so that the battery is in the unlock
position and then slide the battery upwards.
Each baery has a switch on it. The baery must be set
to 1 for the baery to power the bike. Set this switch to
0 to turn the baery o.
To put the baery back in, slide the grooves of
the back of the baery over the rail of the baery
holder and once it is in securely lock it in place.
The baery with the shorter charging port grooves
goes in the main baery and the longer one goes
into the spare baery.
1) Main Baery - This baery must be in
place to turn on the bike. And it has power
drawing from it when the baery switch is
on 3
2) Spare Baery - This baery does NOT
need to be in place to turn on the bike. This
allows you to charge it while you ride. It
will have power drawing from it when the
baery switch is on 1.