User manual

12
The Battery (cont’d)
The Boomerbeast battey can function completly on its own whether you want to use
it as a power bank or charge it in or outside of your home.
1) External Charging Port - This is the charging port if you want to charge the
battery outside of this unit. Plug the charger directly into this spot. Please see below
for charging instructions. *Please note* 6) Power setting must be set to 1 for this to
work
2) Power connection port - Connect this to the unit to give power to your Boomer-
beast
3) USB power port - Connect USB devices here to power them *Please note* 6)
Power setting must be set to 2 for this to work
4) 110V Outlet - Connect regular 110V devices here to power them *Please note* 6)
Power setting must be set to 2 for this to work
5) Handle - Raise this handle to easily lift the battery pack. There is one on each side
for easier manuvering.
6) Power Setting - Set this to 0 for no power input or output. Set it to 1 to allow
it to be charged (power input). Set this to 2 to give power to other devices (power
output). *Please note* These settings are irrelevant when the Power connection port
is connected