User`s guide

The Austin Electric Bicycle User’s Guide
TPS Training Bulletin
Page 13
Switching Between the Main and Spare Batteries
Your Austin e-bike has two batteries. This gives you a much greater traveling distance than
having a single battery.
The main battery is located in the battery compartment between the seat and the steering
column. The spare battery is stored in the seat compartment.
Like the main battery, the spare battery is made up of 4 battery cells, though they are
stored loosely in a sack instead of being placed in an enclosed pack, in order to fit them
into the seat compartment.
If your main battery has been depleted, you must manually switch the power input so that
you can use the spare battery in the seat compartment. There is no automatic switch.
Follow this procedure to switch the input from the main to the spare battery.
1. Turn off your e-bike and remove the key.
2. Open the seat compartment.
3. Identify the main battery input plug, and remove it from the power socket.
4. Plug the spare battery plug into the power socket.
5. Close the compartment and re-start your e-bike.
Charging your E-Bike
Charging your e-bike is a simple process. You require the following:
• The chargers that came with your e-bike
• One or two 110V household electrical outlets
Charger Warning
Only use the chargers that were supplied with your e-bike. Using
chargers that do not have specifications identical to those which came
with the e-bike could irreparably damage your e-bike’s battery and
electrical systems, and may cause injury.