Instruction Manual
INTELLISENSOR Smart Control
Installation of DC motion sensor
Take out the sensor from the box
After removing the protective cover on the
sensor contact pin, you can install it.
If
xture has sensor receptacle installed,
screw the 1/2'' knockout out with screw
driver by illustrated direction, and screw the
sensor kit on. The sensor is set as universal
mode(refer to sensor spec sheet), the
setting is program mable via remote
control(the remote control is not included in
standard packing)
Default sensor setting
Brightness
Stand-by dim
Sensitivity
Hold time
Stand-by time
Daylight
1min
1min
Off
100%
20%
100%
Microwave Frequency
5.8GHz±75MHz
Microwave Power
<0.3mW
Detection Range
Max,14m/45.92ft Ceiling Mounted
Mounting Height
Max,15m/49.2ft Ceiling Mounted
1/2 NPT
0.394
0.906
Stan d- by
time
Hold time
1. Please read the instructions carefully before using this product and keep it well for all users to read
at any time.
installation.
3. We reserve the right to modify any incorrect text, image and necessary technical parameters.
Attention
when the human body continues to move.
3. Detection area will be affected by speed of motion such as human body/car driving, mounting height and movement volue.
12/39.3
9/29.5
6/19.7
3/9.8
12/39.3
9/29.5
6/19.7
3/9.8
2/6.5
4/13.1
6/19.7
8/26.2
10/32.8
12/39.3
14/45.9
16/52.4
18/59
3/9.8
6/19.7
9/29.5
12/39.3
15/49.2
2/6.5
2/6.5
4/13.1
4/13.1
6/19.7
6/19.7
8/26.2
8/26.2
10/32.8
10/32.8
Unit:m/ft