Specifications
ww w. daxib.c om
INSTALLATION GUIDE DAX-82012-CR
CS@daxib.com
T
OOLS MAY NEED:
1. Remove drain body (3) from tailpiece (7)
then remove rubber washer (4), rubber
gasket (5), and metal nut (6) from drain
body.
2. Insert drain body (3) and rubber washer
(4) through the drain opening at the top
of the sink.
3. Insert rubber gasket (5) onto the drain
body and then tighten the metal nut (6)
on the drain body to push rubber gasket
(5) up against the bottom of drain
opening. Tighten the nut with slip-joint
pliers.
4. Apply teflon tape on both tailpiece
thread connection and drain body.
5. Turn handles on faucet to the full on
position and inspect to insure that
there is no leaking underneath lavatory.
INSTALLATION:
1
2
3
4
5
6
7