Specifications

ww w. daxib.c om
INSTALLATION GUIDE DAX-478-CR
0605 07
08
Handle Removal Maintenance Valve Cartridge Removal Maintenance
Clos e
Open
Hot
Cold
After installation is complete, remove Spray
head and rotate handle to the close position.
Turn Water Supply Valves on, and check all
connections for leak. Flush faucet by running
hot and cold water in full position for one
minute.
Replace Spray head.
Lift the handle up, the cartridge will be
activated allowing water to ow. The water
ow will increase by continuing to rotate
handle. By rotating the handle to the right, the
water temperature will decrease to cold ow
only. By rotating Handle to the left, the water
temperature will increase to hot only.
Attach Weights to the pull-out hose using
screws at the proper point of the hose. Be
noted Weights are optional.
Turn off water and relieve pressure! Detach
handle button using a small athead screwdri-
ver, unscrew set screw using Allen Wrench and
take off handle.
Remove handles. Unscrew Dome Cap counter
clockwise by hand. Unscrew Retaining Nut
using adjustable wrench, take out cartridge
assembly and inspect. Replace parts as neces-
sary. Reassemble parts by reversing steps.