Kitchen & Bath Products, Inc. www.dawnusa.net Installation Instructions Model: AB75 1229 Single-lever Lavatory Faucet TABLE OF CONTENTS Preparation 2 Parts & Tools Needed 2 Installation 3-4 Care and Cleaning 5 Warranty 5 Return Policy 5 Asking for Assistance 5 Please read all instructions carefully before starting the installation.
AB75 1229 INSTALLATION INSTRUCTIONS PREPARATION ● ● ● Before You Begin Before installing any Dawn product in your home, make sure you are in compliance with all local plumbing codes. Check The Accessory Items Before installation, please check the condition of the product and, if appropriate, its components. If there is any problem with the product and/or its components, please contact the store you purchased it from for a replacement.
AB75 1229 INSTALLATION INSTRUCTIONS INSTALLATION IMPORTANT: Recommended for professional installers only. The installer maintains responsibility for installing the product safely. ● ● ● ● The faucet main body is already assembled. Do not disassemble it. Thoroughly clean the inside of all pipes with a cloth before installation. Check all connections for leaks after installation. Water pressure range 0.05 Mpa to 1 Mpa; water temperature range 39°F to 194°F (4°C to 90°C).
AB75 1229 INSTALLATION INSTRUCTIONS INSTALLATION IMPORTANT: Recommended for professional installers only. The installer maintains responsibility for installing the product safely. Make a faucet hole. Remove the nuts (8) from the rods (7). Attach the rods (7) and supply hoses (9) to the main body. Insert the faucet through the faucet hole as shown in Fig. 2. Install the 2-hole washer (5), 2-hole gasket (6), and nuts (8) from the underside.
CARE AND CLEANING To maintain the product and to avoid possible damage: 1. Clean as and when required. Regular cleaning prevents scale buildup and water spotting. 2. To clean, flush with clean water and dry with a soft cloth. 3. To remove scale or water spots, only use cleaners made specifically for that purpose. Apply cleaners to cleaning cloths, pads, or sponges first; do not apply directly onto the product. 4. Do not allow any cleaning product to remain on your faucet for longer than necessary. 5.
