Installation & Assembly

ManualsBrandsDaweier ManualsBathroom Remodel & Bathroom FixturesSingle Hole Bathroom Faucet

TABLE OF CONTENTS

Preparaon 2

Parts 2

Installaon 3-4

Care and Cleaning 5

Warranty 5

Return Policy 5

Asking for Assistance 5

Please read all instrucons carefully before starng the installaon.

Installaon Instrucons

Model: EB1359150

Single-Lever Lavatory Faucet

by Dawn Kitchen & Bath Products, Inc.

877-Dawn-USA · dp@dawnusa.net · www.dawnusa.net

Summary of content (5 pages)

PAGE 1
by Dawn Kitchen & Bath Products, Inc. 877-Dawn-USA · dp@dawnusa.net · www.dawnusa.net Installation Instructions Model: EB1359150 Single-Lever Lavatory Faucet TABLE OF CONTENTS Preparation 2 Parts 2 Installation 3-4 Care and Cleaning 5 Warranty 5 Return Policy 5 Asking for Assistance 5 Please read all instructions carefully before starting the installation.
PAGE 2
EB1359150 INSTALLATION INSTRUCTIONS PREPARATION ● Before You Begin Before installing any product by Dawn® in your home, make sure you are in compliance with all local plumbing codes. ● Check The Accessory Items Before installation, please check the condition of the product and, if appropriate, its components. If there is any problem with the product and/or its components, please contact the store you purchased it from for a replacement.
PAGE 3
EB1359150 INSTALLATION INSTRUCTIONS INSTALLATION IMPORTANT: Recommended for professional installers only. The installer maintains responsibility for installing the product safely. ● ● ● ● The faucet main body is already assembled. Do not disassemble it. Thoroughly clean the inside of all pipes with a cloth before installation. Check all connections for leaks after installation. Water pressure range 0.05 Mpa to 1 Mpa; water temperature range 39°F to 194°F (4°C to 90°C).
PAGE 4
EB1359150 INSTALLATION INSTRUCTIONS Make a faucet hole. Make sure the mounting surface is clean and dry. Tighten the mounting shanks to the faucet body. Insert the faucet through the faucet hole. From below the deck, assemble the horseshoe washer, horseshoe bracket, and mounting nuts to the mounting shanks. Tighten the mounting nuts with a wrench. Assemble the supply hoses to the faucet. Be careful not to twist the supply hoses. Connect to the water supply and flush to check for leaks.
PAGE 5
CARE AND CLEANING To maintain the product and to avoid possible damage: 1. Clean as and when required. Regular cleaning prevents scale buildup and water spotting. 2. To clean, flush with clean water and dry with a soft cloth. 3. To remove scale or water spots, only use cleaners made specifically for that purpose. Apply cleaners to cleaning cloths, pads, or sponges first; do not apply directly onto the product. 4. Do not allow any cleaning product to remain on your faucet for longer than necessary. 5.