Installation Guide


Ultra Thin Glass Installation User Guide
Installation
Remove the guide 󽗉lm from the hole on the top of the jig.
Detach the GLASS below the bubble by about 2cm and
while holding the top of the 󽗉lm with your hands,
be careful not to slide the jig, and gently push it with a squeegee to attach it.
󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖼
󾖴󾖴󾖴󾖴󾖺󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖼
STEP7-1 (When bubble appears during installation)
Folding area
(Bubble)