Cov lus qhia

5.DataTransmission
Clickthe“Send(F4)”buttonlocatedinthelowerleftsectionoftheSendSxʼsmainscreen.
Assoonasthedatatransmissionstartsasshownbelow,thePRESET1LEDontheAMBISPACEflashes.
ThePRESET1-4LEDsflashandilluminatesteadilystartingfromthePRESET1LED.Whenallofthe
PRESET1-4LEDsilluminate,thenthedatawritingprocessiscompleted.
CAUTION!
EvenwhentheindicationontheSendSXshowsthatthedatatransferiscompleted,thewritingprocesson
theAMBISPACEisnotcompleteduntilallofthePRESET1-4LEDsturnon.
NeverturnoffthepowertotheAMBISPACEduringthedatatransmissionandwritingprocess.
WhenallofthePRESET1-4LEDsilluminate,presstheMODEswitchtorebootandtobereadyfor
operation.Thiscompletesthefirmwareupdateprocedure.
4.ConnectingAMBISPACEandMIDIInterface
1)ConnectonlytheAMBISPACEʼsMIDIINterminaltotheMIDIinterfacesʼMIDIOUTterminal.
2)TurnonthepowertotheAMBISPACEwhileholdingdownboththeMODEandEDITswitches.
ThePRESETMODEandMANUALMODELEDsabovetheMODEswitchandtheEDITLEDabovetheEDIT
switchilluminate.
TheAMBISPACEisnowreadytoreceivedata.
10
OUT