Operation Manual

3.4 Wireless Advanced
This page allows you to configure advanced features of the wireless LAN interface. You can
select a particular channel on which to operate, force the transmission rate to a particular speed,
set the fragmentation threshold, set the RTS threshold, set the wakeup interval for clients in
power-save mode, set the beacon interval for the access point, set XPress mode and set
whether short or long preambles are used.
Click "Apply" to configure the advanced wireless options.
For maximum reliable link speed, it is recommended that Auto Rate is selected and the client
and AP negotiate the best operating combination.
The settings shown in the image below are the default settings for 802.11g operation
The channel number is the 802.11 channel number used for transmitting and receiving data.
When any of the above settings are changed, the Save/Apply button must be clicked in order to
activate them.