Operation Manual

Data
Enc
Setting
Off WEP
TKIP, AES, or TKIP +
AES
PassPhrase
Disabled
up to 32 character string
containing ASCII characters
with codes between 0x20 and
0x7e
Disabled
Network
Key 1 thru
Network
Key 4
Disabled
5 or 13 ASCII characters or 10
or 26 hexadecimal digits
Disabled
Current
Network
Key
Disabled 1 to 4 Disabled
<Table 10> Parameter Value List/Range depend on Network Authentication Settings
Setting Description Value List or Range Default
Network
Authentication
Sets the network authentication
method. 802.1X and WPA require that
valid RADIUS parameters be set.
WPA-PSK requires a valid WPA Pre-
Shared Key to be set.
Disabled, 802.1x, WPA,
WPA-PSK
Disabled
WPA Pre-
Shared Key
Sets the WPA Pre-Shared Key (PSK).
Depends on Network
Authentication setting.
See <.
<NULL>
WPA Group
Rekey Interval
Sets the WPA Group Rekey Interval in
seconds. Set to zero to disable periodic
rekeying.
Depends on Network
Authentication setting.
See <.
0
RADIUS
Server
Sets the IP address of the RADIUS
server to use for authentication and
dynamic key derivation.
Depends on Network
Authentication setting.
See <.
<NULL>
RADIUS Port
Sets the UDP port number of the
RADIUS server. The port number is
usually 1812 or 1645 and depends upon
the server.
Depends on Network
Authentication setting.
See <.
1812
RADIUS Key Sets the shared secret for the RADIUS
connection.
Depends on Network
Authentication setting.
See <.
<NULL>
Data
Encryption
Selecting Off disables data encryption.
Selecting WEP enables WEP data
encryption and requires that a valid
network key be set and selected unless
802.1X is enabled.
Depends on Network
Authentication setting.
See <.
Off (Disabled,
802.1x); TKIP
(WPA, WPA-
PSK)