Operation Manual

2 Advanced Setup
There are many advanced router features and Internet Telephony features supported by the
DV-2010. These features are documented in this section, and include:
1. Various NAT Function(Virtual Servers, Port Triggering, DMZ Host)
2. Security(LAN IP address, port number filtering, Parental Control)
2.1 NAT (Network Address Translation)
The DV-2010 is capable of operating in several modes that adjust how the device routes IP
traffic. These features are accessible from the Advanced Menu on the left Main menu.
2.1.1 Virtual Servers
Virtual server setup page will be come up when you click NAT sub menu of the Advanced
Setup menu.
Virtual Server allows you to direct incoming traffic from WAN side (identified by Protocol
and External port) to internal server which has a private IP address on the LAN side. The
Internal port is required only if the external port needs to be converted to a different port
number used by the server on the LAN side. A maximum 32 entries can be configured.
Click on the Add button to configure virtual server.