Operation Manual

1.2 Access to WEB UI of IAD
All Triple related configurations will be downloaded from TFTP server after DV-2010 is
connected on DSL line and DSL connection is established completely. Configuration file
includes PPP user name, password, voice setting and son on. User doesn¡t need to set complex
settings to enjoy Triple Play service. Just plug and enjoy service.
When you need set user specific setting like WLAN and Virtual server, access IAD using
HTTP.
Instruction
Before accessing Web Manager, verify the state of the DV-2010 LED is
blinking properly. This indicates that the DV-2010 is ready to be configured
1. In order to configure this device, you should understand port forwarding, DMZ and
port triggering. If you don¡t understand properly, contact service center.
2. Open a new Web browser window and enter the DV-2010¡s IP address, Enter ¡ht DV-
2010://192.168.1.1¡ for the URL
At this point, the PC should present an authentication window similar to this one
Enter ¡user¡ in the User name and Password field.
Instruction
User can change this default password using management menu on the WEB UI
(User Interface)
user