Manualshelf

Operation Manual

ManualsBrandsDavolink ManualscomputerDV-2010
21222324252627282930
7. Open ¡ COMMAND PROMPT¡ window and Execute ¡ ipconfig¡ command to make
sure that your PC is assigned IP address, subnet mask and default gateway value.
NOTE
Window98 and Window ME version support ¡winipcfg¡
Remember the IP Address value should be in 192.168.1.2~ 192.168.1.254, subnet mask
should be 255.255.255.0, and Default Gateway should be 192.168.1.1
8. From windows system, go to ¡run¡. Type in ¡command¡.
From ¡ Command Prompt¡ screen, type ¡ping 192.168.1. 1¡ and press ¡Enter¡.
If the following message is displayed, your computer is properly connected to the PC port
of DV-2010.
[c:\]ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=255
Reply from 192.168.1.1: bytes=32 time<1ms TTL=255
Reply from 192.168.1.1: bytes=32 time<1ms TTL=255
Reply from 192.168.1.1: bytes=32 time<1ms TTL=255
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximu m = 3ms, Average = 2ms
[c:\]