Operation Manual

RJ-11 Plug
(Analog phone/Fax)
Connect
RJ-11 Plug
( FXS port )
Pin Signal Pin Signal
1 NC 1 NC
2 NC 2 NC
3 Ring 3 Ring
4 Tip 4 Tip
5 NC 5 NC
6 NC 6 NC
<Table 4> FXS port cable pin connection
1.3.3 ADSL port
This port is used for connecting to CO(Central Office) Trunk, or connect to splitter.
It use RJ-11 Connector.
RJ-11 Plug
( PSTN ) Connect
RJ-11 Plug
( PSTN port )
Pin Signal Pin Signal
1 NC 1 NC
2 NC 2 NC
3 Ring 3 Ring
4 Tip 4 Tip
5 NC 5 NC
6 NC 6 NC
<Table 5> ADSL port pin connection
1.3.4 Cable Length
Maximum Length of cable, which is connected to DV-2010n, must comply with the
following:
1 ) Ethernet
Maximum length of 10/100BaseT Ethernet is 330 feets/100 meters. (complies with
IEEE802.3 Recommendation)
2 ) Analog line
Maximum length of analog line is defined by loop resistance. Maximum loop resistance is
up to 600Ω (included telephone/voice switch).