User's Manual

500151R01
DAVISCOMMS (S) PTE LTD
Daviscomms Confidential Page
20 of 28
TR-800 PROGRAMMER
Step 1: Enter your COM Port number. The default value is 1. The programmer will set the COM port
to the following settings:
COM Port Baud Rate = 115200 bps
Data Bits = 8
Parity = None
Stop Bit = 1
Flow Control = None
Step 2: Browse for the m0 file (firmware file) to be programmed into the module. Ensure that the path
and file name of the m0 file is correct before proceeding.
Key in COM port number