User's Manual

500151R01
DAVISCOMMS (S) PTE LTD
Daviscomms Confidential Page 16 of 28
3.2 Evaluation Kit
3.2.1 Evaluation kit usage description
The evaluation kit is used for development purposes to test the MTD1000 unit on its
functionalities on GSM/GPRS/GPS applications.
You will not require to power up the evaluation kit if only for AT commands communication to the
MTD-1000 unit.
Configuring the jumpers requires the evaluation kit to be powered up by the external power
adaptor
3.2.2 Full hardware setup for MTD1000 with evaluation board
MTD1000 hardware setup with the evaluation PCB board for AT commands communication..
Connect the RS232 cable
from the evaluation kit to
the serial comport of PC
Use the 10 pin
male to male
data harness
cable to
connect to the
evaluation kit.