User Manual

Menu - Configuration

Step.1 - Select MENU > CONFIG > IP SETTINGS > DHCP > select ENABLE.

Note: With this option you have to manually enter an IP address, subnet mask

and gateway IP address. These are given to you by the network

administrator.

Follow the procedure below to do this.Only when the DHCP

is disabled, can the IP option be available.“Not available while DHCP

is enabled” will be displayed if DHCP is enabled.

Step.1 - Select MENU > CONFIG > IP SETTINGS > DHCP > select DISABLE.

Step.2 - In IP SETTINGS menu > FIXED IP SETUP > IP ADDRESS > for eg:-

key in 192.168.123.204 > select OK.

Step.3 - In FIXED IP SETUP menu > SUBNET MASK > for eg:-

key in 255.255.255.0 > select OK.

Step.4 - In FIXED IP menu > DEFAULT GATEWAY > for eg:-

key in 192.168.123.254 > select OK.

( 2 ) IP Settings

Fig.49 DHCP Notice Screen

Fig.50 Subnet Mask Screen

ACTIVATE

BACK

OK CLE AR

IP Settings: DHCP Settings

IP Settings: Fixed IP Settings